Author Archives: iglues

Know Thy Contractor For Roofing Services in Miami Florida

Ask any day and anyone what is the most important part of the house and everyone would say that it is the roof. It is one of the most permanent structures in the building after the walls and has to be built right to last for years to come. With the prices of building materials shooting up, investing behind the roof for multiple times can be a costly affair which many homeowners would like to avoid. In case of commercial roofing, this is far more applicable as building contractors would perhaps not likely take the liability later for any damage caused to the roof due to exposure to rough weather over time. Even if they do, they will make sure that it shells out money from the owner's pocket. To avoid such ill consequences, it is crucial therefore to work with experienced contractors offering roofing services in Miami, Florida.

There is however a speck of concern. With so many contractors offering roofing services in Miami, Florida how would homeowners know that they are knocking on the right door? There are some questions that need to be answered to choose the right contractor.

The very first thing that one should enquire about is the nature of the company. This means that as the client you should be well aware whether the roofing contractor you are dealing with is a licensed company or not. It is also crucial to find out whether they are insured. It is mandatory for all contractors offering roofing services in Miami, Florida to have a general contractor's license. At the same time an insured contractor can compensate you for any kind of damage to the property or personal injury. This helps in saving yourself from facing financial setbacks.

The second most important thing to note about the contractor is to check their years of experience. It is extremely important that the contractor taking charge of your roofing services is well aware of the climatic conditions of the location of your property as well as the energy needs of your home. In a place like Miami, Florida which experiences rough weather if not too much but still occasionally, care has to be taken to choose the proper material for the roof so that it is sturdy enough to withstand the thrashes of the rough weather.

A contractor's warranty is the next best thing that you can check for while settling the contractor for taking care of roofing services in Miami, Florida. According to such a warranty, the contractor is liable to arrange for a replacement for a poorly designed or installed roof that shows signs of damage in no time.

It is also crucial to know whether the contractor in charge of your roof has a recognized and permanent business location or not. A contractor with a credible contact address helps to grow a more trustworthy customer base compared to one which moves office from one place to another. A permanent place also means that you can quickly get in touch with them in case there is any problem.

The success of a good roof therefore lies in the hands of the roofing contractor. It is therefore vital that one with a steady hand is chosen to lay the tiles in perfect order.

Top Roofing Materials – Select the Best One for Your Roof

Do you know how important is the roof of your house? Well, it's pretty obvious that the roof of your house protects you and your family from all forms of weather, heat, cold, snow, rain, and hail. When you think about roofing, you must select the best roofing material that will last for a long period of time. Nowadays there you will find a wide choice of materials used to build roofs on a house ranging from basic shingles to green metal roofing materials. If you are wondering about the type of roofing materials available in the market and what to use for your home, look no further. In this article, I have suggested a few roofing materials for your home:

When you're getting a new roof, there are many things to decide, one of the most important things to do and consider is which contractor you want to go with. Choosing an insured and bonded roofing company with a great reputation should be the most important factor. If you live near St. Louis, you can search for such a contractor by just typing the keyword as "Roofers St. Louis". You will get a list of roofers, from that list do a little research and you will find one who is eager to help you protect one of your most valuable assets, your home.

How to Prepare Waterproof Parking Structure?

Nash was under pressure to complete the rooftop parking structure at Saddleback Memorial Medical Center during one of Southern California's hottest and longest-lasting heat waves. Did they beat the heat and get the job done. Saddleback Memorial Medical Center is a world-class medical center located in southern Orange County, California. Saddleback was recently named one of the top 100 hospitals in the United States by Thomas Reuters, an independent health research organization, and is ranked Best Hospital in several medical specialties by U.S. News & World Report. But according to John the heat wave brought unseasonably high temperatures for weeks on the end. Nash of Nash Deck Coatings, the three-level parking structure at the medical center was no living up to expectations.

"There was severe peeling and flaking of the existing top coat on the access ramps and roof deck of the parking structure," explains Nash." It seems like an inferior product was put down very thin on the deck, and it was peeling pretty badly."

Something needed to be done to the 15,000-square -foot access ramp and roof deck area to restore safe and functional parking. This is where Polycoat Products' Polyprime U And Poly-I-Gard 246SC came into the picture.

HOT TIRES, GOOEY MESS

A peeling top coat was not the only issue with the roof deck. Send had not been broadcast into the existing coating system, making the deck extremely slippery when wet.

"When it rained, cars and people would go skidding and sliding around," Nash says. ," In addition, the hot tires of the cars that drove up the access ramps and onto the roof deck took the material with them, leaving a peeling and slippery mess. To make sure everyone remained safe, the top level of the parking structure had to be closed whenever it rained."

While Saddleback Memorial Medical Center staff felt it necessary during inclement weather to close the roof of the parking structure to ensure patient and visitor safety, they realized doing so was not an acceptable solution.

Nash performed a number of adhesion tests to make sure that the Polyprime U and Poly-I-Grad 246 SC would properly adhere to the existing urethane base coat. "If we had adhesion tested it and the primer lifted, we would have had a problem," says Nash. "But that was definitely not the case with the saddleback project."

Since the polycoat products coatings passed the adhesion tests by adhering to the existing urethane base coat, it was determined that only the top coat needed to be completely removed the base coat could remain on the concrete substrate - thus saving the client a great deal of money and time.

"At that point in time, we were ready to apply Polyprime U directly to the existing base coat," says Nash

Adriaan van der capellen, southern California sales manager for polycoat, agrees that Polyprime U was the right choice for the job.

"Polyprime U is an intercoat adhesion primer for existing urethane systems," explains van der capellen. "It really takes a hold of and bites in to the existing urethane."

STIFLING HOT

According to Nash during the late summer and early fall of 2012 there were many days temperatures soared to above 100 F (37.78 C) in southern Orange County, California, which is quite an unusual occurrence.

"It was 109 F (42.78C) outside, and the temperature would be even higher on the roof deck, " says Nash. " It was ridiculously hot." It was decided that postponing the job might be the best option. By the end of the two week period, Nash and his crew were eager to get started on the job, not to mention eager for the weather in southern California to return to normal. With no end the heat wave in sight, Nash had to pull the trigger.

"We had to go in on the third week regardless of the heat wave," Nash says. "The job had to get done!"

After making the decision to go ahead with the job. Nash and his five man crew began the surface preparation. The entire roof deck area and all access ramps were power washed using a power washer.

"We power -washed the deck on the Sunday before we started surface prop and coatings," says Nash. He and his crew needed to be finished with the job within five working days, so they took advantage of the slower vehicular and pedestrian traffic on the weekend to get a jump on the first step of the process.

"Since the hospital never closes, the parking structure needed to remain open," Nash says. "The two lower levels were open even while we were doing work on the roof.

Once the deck was power-washed, the crew got down to the business of removing the existing top coat using a grinder. The deck was divided into three sections and each section was prepped, repaired (if necessary), primed, and coated before moving onto the next section.

"The very last section was into he worst condition", says Nash." It was the largest section and had the most traffic come across it, so it makes sense that it was the most damaged".

In all the sections, the crew made concrete repairs as necessary before moving on to priming and coating. Depending on the severity of the cracks, the crew used gun-grade urethane, embedded carbon fiber tape, and/or caulking to bridge the gaps.

THREE-HOUR CURE

With surface prep and repairs made, the crew was ready to apply the Polyprime U.Using squeegees and rollers, the Nash Deck crew applied the high-solids primer to the roof deck at 3 mils (76.2 microns), DFT. Under typical circumstances, Polyprime U should be coated within 12 hours after it has becomes tack-free; however, because of the extreme heat, the primer cured much faster.

"We were able to apply the Poly-I-Gard 246 SC within three hours after we laid down the primer," Nash explains.

Poly -I-Gard 246sc is a single component ,moisture- cured, aromatic polyurethane waterproofing -I-Gard 246SC is designed for use in Southern California to meet the region's low volatile organic compound (voc) requirements.These requirements are set forth and regulated by the South Coast Air Quality Management District (SCAQMD),which encompasses most of Los Angeles, san Bernardino ,Riverside, and all of Orange Counties. The SCAQMD regulates all sources of stationary sir pollution for the aforementioned regions.

The crew poured and rolled the Poly-I-Gard 246 SC at a thickness of approximately 10 mils (254 microns).Nash credits the Polycoat materials for performing incredibly well under unusual circumstances.

"I was a little worried about gassing because of the high temperatures," Nash says." It wasn't a problem with the polycoat Products coatings. There were no

bubbles and no gassing." Nash did, however, make some adjustments. Both the Polyprime U and the Poly-I-GARD 246SC are sensitive to heat, so Nash was very careful with batch sizes, especially the primer." I mixed the two-part Polyprime U primer in half batches-we mixed two-and-a-half gallons, sometimes less, at a time instead of the usual five gallons." Nash says.

NO DAY AT THE BEACH!

Working feverishly, the Nash Deck crew broadcast Cemex-brand Lapis Luster 2/16 sand onto the wet coating.

"We needed to have a fairly aggressive non-skid component added to the coating system," says Nash. In the highest traffic areas, there was a double broadcast, ensuring excellent non-skid properties. Two final coats of 10 mils (254 microns), DFT, of Poly-I-Gard 246sc were then laid on the entire deck area. In the areas of highest vehicular traffic, the coating systems has a thickness of over 40 mils (1016 microns) that protects the existing urethane base coat and underlying concrete substrate. The non-skid component of the system ensures that cars and pedestrians do not slip and slide in wet conditions.

"We finished on Friday and the stripers came in on Monday,"Nash says." The roof deck of the parking structure was open to pedestrians and vehicles on Tuesday." Throughout the project, Nash and his crew followed all standard safety procedures.

THEY BEAT THE HEAT

Polycoated Van Der Capellen is extremely happy with the outcome of the job.

Nash is quick to point out he is impressed with the coatings and his crew.

"I've been doing this a long time -25 years -and I am really happy with the way the Poly-I-Gard 246SC performs," says Nash. Although this was Nash Deck Coatings first job for Saddleback Memorial Medical Center, with the way his crew beat the heat to recoat and reopen the parking structure, Nash bets it will not be the LAST!

EPDM Roof Repair Using EPDM Roofing Sheets

Flat roofs can develop cracks over time. Improper maintenance, accumulation of debris, fungus growth and water build up are some of the common causes of roof damage and consequent leaks. If left unattended fine cracks widen into larger ones, leading to more serious problems. One can find a variety of roof repair kits in the market. Some are cement based crack repair pastes with polymer additives, synthetic resins and so on. However, these are not lasting solutions. Once a crack develops it will keep on developing and all these patching jobs are only temporary solutions. The best way to go about flat roof repairs is to choose EPDM roofing sheets.

EPDM (Ethylene propylene diene monomer) is a synthetic rubber elastomer formulation used in a variety of engineering applications. EPDM has excellent resistance to weathering, to UV and Ozone, wide temperature ranges and environmental conditions. EPDM retains its properties for decades without developing cracks or degrading. For flat roof waterproofing and treatment EPDM is available in the form of black sheets usually 1mm, 1.5 mm or 2mm thick, in roll form. EPDM roofing sheets are wide enough to cover a flat roof in a single piece.

EPDM sheet is one of the best solutions for flat roof repairs. A homeowner can call in a professional to lay out the roofing sheet or even do it himself. The sheets are flexible, easy to handle and can be laid out in no time at all. The Flat Roof Repair only needs a little bit of surface treatment and cleaning followed by an application of adhesive coat. With someone to help out you can easily roll the sheet across the tacky adhesive, press it down evenly and smoothly and you have a Flat Roof Repair that will remain leak proof for decades. Besides, EPDM roofing sheet protects the underlying structure and provides a measure of additional insulation with years of trouble-free, maintenance-free performance at the least cost. It is easy to do it yourself and there is a 100% guarantee of success unlike other methods like crack filling pastes that can separate and necessitate costly repairs.

EPDM roofing sheets are available from reputed manufacturers in a variety of sizes, the smallest being a roll 25 feet long and 5 feet wide. One can even buy EPDM roofing sheets 50 feet wide and 100 feet long. Do it yourself, buy only the required lengths get perfect and assured results and enjoy years of protection with the minimum of effort and time. Epdm is a time-tested, versatile material that has proved its superiority and is one of the best money for value options for flat roof repairs. Buy EPDM roofing sheets from a nearby store or order it online along with the adhesives and other tools at affordable prices.

Fort Lauderdale Roofing

Those who live in the Fort Lauderdale area know the importance of good roofing. Rain that at times turns into torrential downpours is a permanent feature of Fort Lauderdale weather. Given this fact, it is important to have a Fort Lauderdale Roofing company you can trust-a roofing company Fort Lauderdale that can take care of all your roofing needs.

If you have a roof that is leaking or is in danger of leaking because of wear and tear, not doing anything is not going to solve the problem. In fact, you could end up shelling out even more money because of water damage and other incidents related to a leaky roof. Contacting a Fort Lauderdale roofing contractor is the first step in fixing your roof and reclaiming your home.

However, you want to make sure that the Fort Lauderdale roofing contractor you choose has a license to practice business. You would not trust an amateur to look after your house or a candy store to look after your money; similarly, you should not put the roof of your house in the hands of someone who doesn't know what they're doing. Also, you are going to be paying a hefty sum of money for you new roof, so you should have the satisfaction of knowing that it will be built using the best materials and by persons who have the skill and expertise to do it right the first time.

Next, you want to find out whether the Fort Lauderdale roofing contractor you hired has any references. The best predictor of future performance is past performance. If the contractor's previous customers had a good experience, chances are your experience will be satisfactory as well. Another thing to keep in mind is the willingness of the contractor to take away your old roof. It's not a good idea to assume this will be done. And having an old roof lying around your home is the not something you and your neighbors are going to want.

You should also ask the Fort Lauderdale roofing company how long it will take to complete the job. If it cannot be completed in a timely manner, you may want to speak to a different contractor. Remember, you are the one paying for this work, so you should expect it to be done expeditiously: Florida weather waits for no one, and the next heavy thunderstorm or rain shower could come any day.

Roofing Fort Lauderdale is a large industry, and there are many Fort Lauderdale roofing contractors from which to choose. Getting to know the various roofing companies is now a lot easier thanks to the worldwide web. Rather than going out looking for roofing companies, you can bring all of the Fort Lauderdale roofing companies to you, in the comfort and convenience of your own home. Not only that. You can also compare value and price among the different contractors. And you can research each one's reputation to ensure you get the quality and service you pay for.